KARCHER SP 22.000 DIRT SUBMERSIBLE DIRTY WATER PUMP *EU | 1.645-851.0
KARCHER SP 22.000 DIRT SUBMERSIBLE DIRTY WATER PUMP *EU | 1.645-851.0 OUTDOOR EQUIPMENT Johor Bahru (JB), Malaysia, Senai Supplier, Suppliers, Supply, Supplies | Protools Hardware Sdn Bhd
RM 999.00
SKU: SP 22.000
8.000 KG
23 cm (L) x 30 cm (W) x 35 cm (H)
1 in stock

KARCHER SP 22.000 DIRT SUBMERSIBLE DIRTY WATER PUMP | 1.645-851.0

An individually adjustable level sensor starts the dirty water pump SP 22,000 Dirt Level Sensor immediately upon contact with water.
If the water level drops below the level sensor again, the pump stops automatically after 15 seconds.
The extremely powerful submersible pump is ideal for draining, for example, large garden ponds, flooded basements or construction pits,
as it can reliably pump out dirty water (dirt particles of up to 30 mm) at a rate of up to 22,000 l/h.
With even dirtier water, the integrated pull-down stainless steel prefilter serves to protect against blockages.
The submersible pump can also be switched to continuous operation by means of the Automatic/Manual switch.
It can reliably pump water away down to a residual water level of 35 millimetres – both in continuous operation and in automatic mode,
when the level sensor is set accordingly. With the Quick Connect connection thread, 1'', 1 1/4'' and 1 1/2'' inch hoses can be connected without complication.
Thanks to the stainless steel housing and robust slide ring sealing, the pump has a particularly long service life. An extended warranty of five years is available as an option.


FEATURES AND BENEFITS

Ceramic face seal.
For an extra long lifetime.

Level Sensor
For continuously variable definition of the switch-on and switch-off points of the pumps.

Quick Connect
Connection thread for quick and uncomplicated connection of 1'', 1 1/4'' and 1 1/2'' hoses.

Designed for dirty water
Reliable pumping of water with dirt particles up to 30 mm in size.

Auto/manual switch
For switching between automatic and manual mode.

Comfortable carrying handle
Comfortable to hold and can also be used as a rope holder.

Robust and integrated stainless steel prefilter
Protects the pump against excessively heavy soiling and thus prevents the pump impeller from becoming blocked.


SPECIFICATIONS

Technical data
Max. motor rating (W) 750
Max. flow rate (l/h) < 22000
Delivery temperature (°C) max. 35
Delivery head (m) 8
Pressure (bar) max. 0.8
Grain size (mm) max. 30
Immersion depth (m) max. 7
After-running time (s) 15
Min. residual water, manual (mm) 35
Residual water height (mm) 35
Connection thread G1 1/2
Pressure-side connection thread G1/2 internal thread
Power cable (m) 10
Voltage (V) 230 - 240
Frequency (Hz) 50
Weight without accessories (kg) 6.7
Weight incl. packaging (kg) 7.7
Dimensions (L x W x H) (mm) 238 x 293 x 354


Scope of supply
Hose connection piece: 1'', 1 1/4'', 1 1/2''


Equipment

  • Comfortable carrying handle
  • Easy hose connection thanks to Quick Connect
  • Switching between manual/automatic operation: Switch on the pump
  • Level sensor: Continuous switching level definition
  • Integrated stainless steel pre-filter
  • In automatic operation (auto), the pump automatically switches with the water level
  • In manual operation, the pump runs continuously to ensure the minimum quantity of residual water
  • Ceramic face seal.
  • Stainless steel housing



APPLICATION AREAS

  • Pumping water from garden ponds
  • Use in event of flooding
  • Draining building pits up to max. 100 m³



GENERAL TERMS & CONDITIONS OF WARRANTY SOLD IN MALAYSIA

1. 2 (Two) years warranty


2. The warranty terms published by the relevant sales company are applicable in each country.


3. This warranty shall be applicable for Product purchased and operated in Malaysia only.
If the product is shipped and operated outside Malaysia, the warranty becomes void.



4. Please submit the proof of purchase (e.g. relevant receipt/tax invoice) and/or warranty card
to customer service personnel. In case of loss of proof of purchase / purchased date is not
show on the relevant proof of purchase, we reserve right to use manufacturing date
(i.e. the serial no.) of the product as purchased date



5. Upon received the warranty claim, Karcher or its Authorized Service Centre shall at its discretion
to determine whether to repair or to make direct replacement of the product.



6. For High Pressure Cleaners, the warranty covers the replacement of Motor (Max 1 time)
and Pump (Max 2 times) within 2 years Warranty Period.



7. The undertaking and/or completion of repair, service or replacement of Product or its parts
shall in no circumstances extend the warranty period of the Product and it shall thereafter
continue to apply only for the remaining warranty period of the product.



8. For all warranty claims which require repair/service, it must be delivered/sent to/collected
from our customer service center at your own cost.



EXCLUSION OF WARRANTY


The Warranty does not cover the following:

1. Machine Damaged caused by
  • Natural Disasters (Flood, Landslide, Wildfires etc).
  • Misuse, abuse, or neglects of the machine.
  • Commercial use (multi-user organisations), public rental, use for profit, communal use for multi-family
    housing areas, hotel/hostel, restaurant/laundry shop.
  • Improper storage of the machine.
  • Unauthorized modification/repairs.
  • Use of non-approved accessories/replacement parts.
  • Failure to follow the product's operating & maintenance instructions.
  • Accidentals & transportations/courier's damages.
  • Wrongly installation process, modifications/mishandling.
  • Low/high voltage, the use of an incorrectly sized extension leads/a coiled electrical extension lead.
  • impurities in the water supply to the product and/or debris found contaminating the pump and motor.
  • Usage of Non-Approved Chemicals.
2. Wear and tear parts (filters, brushes, high pressure hose / any other hoses, seals, o-rings, batteries, cloth sets, etc.

3. The product was purchased from outside Malaysia / Brunei.


Switch To Desktop Version